Welding Diploma

Print Degree Planner (opens a new window) |

As described by the American Welding Society, welding is a very sophisticated and technical science, requiring not only mental application but also hands-on abilities. Welding is the fusing of the surfaces of two workpieces to form one, and is a precise, reliable, cost-effective, and high-tech method for joining materials. Welding today is applied to a wide variety of materials and products using advanced technologies.

The program is aligned to the American Welding Society’s SENSE Level 1 skills standards. Instruction focuses on providing a comprehensive education which includes both welding theory and application. The listed sequence of course offerings may be altered. The Welding program offers open-entry and open-exit courses. Students will be allowed to enroll in these open-entry/open-exit courses as long as there is space available.

For more information about the Welding program, please visit our website at www.dmacc.edu/programs/welding.

Program Details

Locations: Ankeny, Carroll and Newton

Students may start any semester

Program Entry Requirements

Complete an application for admission.
Satisfy the assessment requirement.
Attend any required information/registration session.

Graduation Requirements

To earn a Welding diploma, a student must complete all coursework as prescribed and maintain a 2.0 grade point average.

Semester 1

SDV 108 - The College Experience Credits: 1
WEL 228 - Welding Safety/Health: SENSE1 Credits: 1
WEL 233 - Print Read/Sym Inter: SENSE1 Credits: 3
WEL 244 - GMAW Sh Cir Transfer: SENSE1 Credits: 2
WEL 254 - Inspection/Test Princ: SENSE1 Credits: 1
WEL 262 - OFC-I Manual & Mech: SENSE1 Credits: 2
WEL 266 - Thermal Cutting Processes II Credits: 1
Any AAS degree core Math course Credits: 3

Semester 2

WEL 245 - GMAW Spray Transfer: SENSE1 Credits: 2
WEL 274 - SMAW 1: SENSE1 Credits: 3
WEL 275 - SMAW II: SENSE1 Credits: 3
WEL 280 - FCAW Self-Shielded: SENSE1 Credits: 2
Any AAS degree Core Communications course Credits: 3

Semester 3

WEL 251 - GTAW Carbon Steel: SENSE1 Credits: 2
WEL 252 - GTAW Aluminum: SENSE1 Credits: 1
WEL 253 - GTAW Stainless Steel: SENSE1 Credits: 1
WEL 281 - FCAW Gas Shielded: SENSE1 Credits: 2
AAS degree Core Social and Behavioral Science/Humanities Credits: 3

Total Credits Required to Complete the Diploma - 36

Fixed Costs

Tuition……………………………………………………………………………………..$160.00 per credit

The costs for each program are estimates and subject to change.

Varied Costs

Costs	Semester 1	Semester 2
Books (approximate)	80	100
Supplies	155

Approximate total for program: $6,095**

**Program entry requirements are not included in the total approximate cost.

What Kind of Work Will You Do?

Use electric arc or flame processes in welding.
Weld steel, steel alloys and other metals.
Weld in all positions such as flat, horizontal, vertical and overhead.
Welder may work in various positions-bending, stooping, etc.
Work from drawings, blueprints and other written plans.
Plan and organize work.
Layout and fit by means of flame cutting, shearing, sawing, etc.

What Skills and Abilities Will You Need?

Demonstrate manual dexterity.
Identify details in objects and drawings.
Lift and carry 50 to 100 pounds.
Read and work from blueprints.
Have adequate vision to see definition in the weld puddle.
Be a self-starter and work independently.
Concentrate for long periods of time.
Perform simple math problems quickly.

What Else Should I Consider about this Diploma program?

Will be working in hot, sweaty conditions, indoors and outdoors.
Welding can be hazardous because of the dusty, smoky environment and electrical dangers.
Many welders are union members depending on the place of employment.
There is a steady demand for qualified/skilled welders throughout the United States. The current trend in employment is toward highly skilled individuals.
Anticipated average starting salary $36,780 (2014-2015 Placement Report).

Nondiscrimination Statement

DMACC offers career and technical programs in the following areas of study:

Agriculture, National & Environmental Services /Architecture, Engineering, and Construction/Arts, Design, and Visual communications/Business, Management, and Marketing/Education, Public, and Human Services/Health Science/Hospitality and Culinary/Information Technology/Manufacturing/Transportation & Logistics

Des Moines Area Community College shall not engage in nor allow discrimination covered by law against any person, group or organization. This includes in its programs, activities, employment practices, hiring practices or the provision of services, and harassment or discrimination based on race, color, national origin, creed, religion, sex (including pregnancy), sexual orientation, gender identity, age (in employment), disability, genetic information (in employment) and actual or potential parental, family or marital status of a person. Veteran status in educational programs, activities, employment practices, or admission procedures is also included to the extent covered by law.

Individuals who believe they have been discriminated against may file a complaint through the College Discrimination Complaint Procedure. Complaint forms may be obtained from the Campus Provost’s office, the Academic Deans’ office, the Judicial Officer, or the EEO/AA Officer, Human Resources. ADA questions and concerns may be directed to the Section 504/ADA Coordinator at 2006 S. Ankeny Blvd, Bldg 6, Ankeny, IA 50023, phone 515/964-6857, sgbittner@dmacc.edu. Title IX questions and concerns may be directed to the Title IX Coordinator at 2006 S. Ankeny Blvd, Bldg 1, Ankeny, IA 50023, phone 515/964-6216, title9@dmacc.edu. Question or complaints about this policy may be directed to the Director of the Office for Civil Rights, U.S. Department of Education, Citigroup Center, 500 W. Madison, Suite 1475, Chicago, IL 60661, phone 312/730-1560, tax 312/730-1576..

Legal references: Iowa Code §§ 216.6 and 216.9, Titles VI and VII of the Civil Rights Act of 1964 (42 U.S. C. §§ 2000d and 2000e), the Equal Pay Act of 1973 (29 U.S.C. § 206, et seq.), Title IX (Educational Amendments, 20 U.S. C. §§ 1681-1688), Section 504 (Rehabilitation Act of 1973, 29 U.S. C. § 794), and Title II of the Americans with Disabilities Act (42 U.S.C. § 12101, et seq.).₍₂₀₁₈₎