MLW 443 - Stationary Equipment

1. Operate band saws
   1. Perform safety routine on band saw
   2. Cut radiuses and circles from layouts
   3. Re-saw lumber as specified
2. Operate table saws, beam saw, horizontal saw, and vertical saw
   1. Perform safety inspection on saws
   2. Identify specific operations of each saw
   3. Perform specific cutting operation as it relates to each saw
3. Operate wide belt sander
   1. Perform safety routine on wide belt sander
   2. Select proper sandpaper grit for assigned project
   3. Set up the sander
   4. Perform the sanding assignment
4. Operate stationary power drills
   1. Perform safety inspection on drilling equipment
   2. Select the proper drill bits for the specific assignment
   3. Set up the assigned project
   4. Drill the assigned project
5. Operate planer and joiner
   1. Perform safety routine of planer and joiner
   2. Mill material to specific dimensions
6. Operate shapers and molder
   1. Perform safety routine of shapers and planer
   2. Select proper cutting knifes for the assigned profile
   3. Set up the assigned project
   4. Mill the assigned project
7. Maintain and operate edge bander
   1. Perform maintenance and safety routine on edge bander
   2. Select proper edging for project
   3. Set up edge bander
   4. Edge band the assigned project