Mar 28, 2024  
2018-2019 Course Catalog 
    
2018-2019 Course Catalog [ARCHIVED CATALOG]

Add to Portfolio (opens a new window)

WEL 283 - Advanced Arc Welding II (FCAW)

Credits: 3
Lecture Hours: 0
Lab Hours: 6
Practicum Hours: 0
Work Experience: 0
Course Type: Voc/Tech
Skills will be developed in welding and testing on vee groove joints in the vertical and overhead positions limited FCAW.
Prerequisite: Welding diploma required  
Competencies
  1. Recall the safety rules for using shielded metal arc welding equipment.
    1. Describe safety rules when setting up SMAW equipment.
    2. State what personal safety gear is worn when using SMAW equipment.
    3. Explain how to prevent electrical shock when using equipment.
    4. Practice safety in all work situations.
  2. Demonstrate the proper set up, start up and shut down procedures of arc welding equipment.
    1. Illustrate proper set up of equipment.
    2. Explain the two types of welding machines.
    3. Show how to set current and polarity.
  3. Differentiate the function of AC and DC current as it relates to different polarities.
    1. Explain the difference between AC and DC current.
    2. Select the electrodes used with AC polarity.
    3. Select the electrodes used with DC polarity.
  4. Identify electrodes and how they are used with different polarities.
    1. Study video #3 and complete workbook assignment.
    2. Relate how electrode size is determined.
    3. Explain the numbers on the electrodes as to what they mean.
    4. Identify the characteristics for each electrode.
  5. Prepare 3/8” x 5” x 5” plate with 45 degree included angle bevel with line cutter.
  6. Set up 3/8” x 5” x 5” plate with 1/4” root opening and 1/4” x 1” x 6” backup strip.
  7. Position 3/8” x 5” x 5” plate in the flat and vertical up positions and weld groove complete.
  8. Cut 1” off each end of plate after welded, grind each end to smooth finish.
  9. Remove back up strip with Oxy-Acetylene rivet cutting tip and grind root and face of plate flush.
  10. Measure and mark remaining 3” piece in half and cut with band saw and grind 1/8” chamfer on corners.
  11. Operate guided bend tester, bend 3/8” x 1 1/2” x 10”, one face bend and the other root bend.
  12. Evaluate each piece to see that there is no defect over 1/8” in any direction.
  13. Lab test over flat and horizontal for final grade.



Add to Portfolio (opens a new window)