Mar 29, 2024  
2018-2019 Course Catalog 
    
2018-2019 Course Catalog [ARCHIVED CATALOG]

Add to Portfolio (opens a new window)

AUT 524 - Auto Brake Systems & Service

Credits: 4
Lecture Hours: 2
Lab Hours: 4
Practicum Hours: 0
Work Experience: 0
Course Type: Voc/Tech
Instruction in the theory of operation and service procedures of automotive brakes.
Competencies
  1. Perform proper shop safety procedures.
    1. Apply work area safety skills.
    2. Demonstrate safe personal working habits.
    3. Practice safe tool and equipment usage.
    4. Follow manufacturer and government warnings and regulations and repair procedures.
    5. Acknowledge liability involved with brake repair.
  2. Explain principles involved with brake system operation.
    1. Analyze vehicle braking requirements.
    2. Discuss math and science principals involved in stopping a vehicle.
    3. Demonstrate an understanding of friction principles.
    4. Describe hydraulic theory and how it applies to base brake systems.
    5. Describe relationship between atmospheric pressure and vacuum.
  3. Examine base brake sub-system.
    1. Discuss master cylinder operation.
    2. Discuss brake booster operation (vacuum and hydraulic).
    3. Discuss drum brake systems design and operation.
    4. Discuss disc brake system design and operation.
    5. Examine brake balance control systems.
    6. Discuss the purpose and operation of ABS.
  4. Hydraulic System Diagnosis and Repair.
    1. Diagnose pressure concerns in the brake system using hydraulic principles (Pascal?s Law).
    2. Measure brake pedal height, travel, and free play (as applicable); determine necessary action.
    3. Check master cylinder for internal/external leaks and proper operation; determine necessary action.
    4. Remove, bench bleed, and reinstall master cylinder.
    5. Inspect, remove, and install hydraulic brake system components.
    6. Fabricate and install brake lines.
    7. Select, handle, store, and fill brake fluids to proper level.
    8. Bleed and/or flush brake system.
    9. Test brake fluid for contamination; determine necessary action.
  5. Drum Brake Diagnosis and Repair.
    1. Diagnose poor stopping, noise, vibration, pulling, grabbing, dragging or pedal pulsation concerns; determine necessary action.
    2. Remove, clean, inspect, and measure brake drum diameter; determine necessary action.
    3. Refinish brake drum and measure final drum diameter; compare with specifications.
    4. Remove, clean, and inspect brake shoes, springs, pins, clips, levers, adjusters/self-adjusters, other related brake hardware, and backing support plates; lubricate and reassemble.
    5. Inspect wheel cylinders for leaks and proper operation; remove and replace as needed.
    6. Pre-adjust brake shoes and parking brake; install brake drums or drum/hub assemblies and wheel bearings; perform final checks and adjustments.
  6. Disc Brake Diagnosis and Repair.
    1. Diagnose poor stopping, noise, vibration, pulling, grabbing, dragging, or pulsation concerns; determine necessary action.
    2. Remove and clean caliper assembly; inspect for leaks and damage/wear to caliper housing; determine necessary action.
    3. Clean and inspect caliper mounting and slides/pins for proper operation, wear, and damage; determine necessary action.
    4. Remove, inspect, and replace pads and retaining hardware; determine necessary action.
    5. Lubricate and reinstall caliper, pads, and related hardware; seat pads and inspect for leaks.
    6. Clean and inspect rotor; measure rotor thickness, thickness variation, and lateral runout; determine necessary action.
    7. Remove and reinstall rotor.
    8. Refinish rotor off vehicle; measure final rotor thickness and compare with specifications.
    9. Retract and re-adjust caliper piston on an integrated parking brake system.
    10. Check brake pad wear indicator; determine necessary action.
    11. Describe importance of operating vehicle to burnish/break-in replacement brake pads according to manufacturer’s recommendations.
  7. Miscellaneous (Wheel Bearings, Parking Brakes, Electrical, Etc.) Diagnosis and Repair.
    1. Diagnose wheel bearing noises, wheel shimmy, and vibration concerns; determine necessary action.
    2. Remove, clean, inspect, repack, and install wheel bearings; replace seals; install hub and adjust bearings.
    3. Check parking brake cables and components for wear, binding, and corrosion; clean, lubricate, adjust or replace as needed.
    4. Check parking brake operation and parking brake indicator light system operation; determine necessary action.
    5. Check operation of brake stop light system.
    6. Replace wheel bearing and race.
    7. Remove and reinstall sealed wheel bearing assembly.
    8. Inspect and replace wheel studs.



Add to Portfolio (opens a new window)